1.1.93 - Missed call badges now show the automatic text. If your clinic texts missed callers automatically, the badge counts down to it ("✉ 2:40") and, opened, offers Skip text and Send now while it is still waiting. Skipping on one computer shows "Skipped by <name>" on every computer within a few seconds, and the badge stays up so you can still ring them back. Once it goes, the badge says when it was sent, or why it wasn't (for example a landline). Anyone at the clinic can use the two buttons.

1.1.92 - Missed call badges: "Done" is now called "Dismiss", and an opened badge now has a ✕. Dismiss takes the missed call away on every computer, as Done did. The ✕ only folds the badge back to its one line - it never removes it - so a missed call you close without doing anything stays on screen until someone calls them back, texts them or dismisses it.

1.1.91 - Older Yealink phones (firmware before 84, such as a T48G) can now be set up. Those phones cannot make secure (https) connections, so after a setup they showed "cannot download remote phone book" and never reached SyncIQ. Turn on "Older phone: use http" for that phone (pencil -> Setup) and "Set this phone up" writes plain http addresses through SyncIQ's own forwarder instead. SyncIQ only ever writes http to its own forwarder; any other http address is still refused. Phones that can do https are unaffected.

1.1.90 - Clicking ✕ on a text you haven't read now always shrinks it to a badge, instead of sometimes closing it. SyncIQ works out whether a text is still unread from a list the app keeps, and when a text had just arrived that list was a moment behind - so ✕ read it as already dealt with and closed the pop-up, taking the unread text off the screen. Clicking ✕ a second later worked properly, which is why it seemed to happen at random and more often on a PC. Nothing was ever really marked as read: the text stayed unread, it just looked that way because the pop-up disappeared.

1.1.89 - SyncIQ now only looks for an update when you open the app, not every hour while you are working. Installing an update always closes SyncIQ, so the hourly check could shut the app down in the middle of the day - the tray icon disappeared and caller-ID pop-ups stopped until somebody noticed and reopened it. It now checks once, about 15 seconds after you open the app. You can still update whenever you like, to any version, from "Check for Updates..." in the tray menu. The trade-off is that a computer left running for weeks will stay on an older version until SyncIQ is quit and reopened, so it is worth closing it now and then.

1.1.88 - Missed calls now leave a badge on screen. When a call rings out and nobody picks it up, a small line appears in the corner with the caller's name, how many times they rang and when - click it to ring them back, text them, or mark it done. Done clears it on every computer in the clinic, and it also clears itself when you ring them back, when they get through, when a staff member texts them, or at the end of the day. Switch it on under Phones & desktop app -> Missed calls, where SyncIQ also tells you first whether your phones report enough for the alerts to be right.

1.1.87 - "Set this phone up for me" now uses the admin login your clinic has already saved, even on a computer that has never worked on that phone. Phones are no longer added to a computer's Click to call list on their own, so the button often had no login to use and fell back to SyncIQ's own login — which cannot change the caller-ID addresses on some phones. It would set the phonebook, leave the caller-ID addresses alone and ask you to save a login you had already saved. It now reads the saved one from your clinic. A login typed on the computer you are pressing from is still used first.

1.1.86 - Click to call now works on a Mac where a different staff member has logged in. macOS asks each person separately before an app may reach the desk phones on your network, and SyncIQ was never asking — so click to call failed for one receptionist and worked for another on the same computer and the same phone, with nothing on screen saying why. It now asks the first time you dial, and if it has been declined you can switch it back on under System Settings -> Privacy & Security -> Local Network. SyncIQ also tidies up after its own updates: the spare copy of the app an update leaves in your Applications folder ("SyncIQ previous") is now removed when SyncIQ starts, so nobody opens an old version by mistake.

1.1.85 - A text you haven't read can no longer be closed by accident. Clicking ✕ on a text pop-up now shrinks it to a one-line badge and leaves it there until the text is actually dealt with, so the Minimise button is gone — ✕ does that job. The old "Mark unread" button now changes with the conversation: while a text is unread it reads "Mark as read", which clears it on every computer and closes the pop-up; once it's read it reads "Mark unread", which puts it back as a waiting badge on every computer in the clinic.

1.1.84 - Right-click Paste now works in SyncIQ's own windows, not just Cmd+V. The menu items were asking the Mac which window was in front, and a text pop-up isn't in front until you click Reply, so Paste was greyed out or went to another app; each item now acts on the window you right-clicked in.

1.1.83 - You can paste into SyncIQ's own windows again. Copy a phone number or a message, then Cmd+V (Ctrl+V on Windows) into a text pop-up's reply box, the dial prompt or Search texts, and it pastes. Right-click in any of those boxes now offers Cut, Copy and Paste too. On Mac nothing was pasting there at all, because SyncIQ lives in the menu bar and so has no Edit menu for Cmd+V to go through.

1.1.82 - Unread texts now come back when SyncIQ starts. Anything that came in while the app was closed or the computer was off (last 3 days, newest first, up to 10 people) shows as a minimised badge, and it clears when the text is read or answered on any computer.

1.1.81 - Texts you haven't dealt with no longer disappear. A text pop-up that times out (or that you minimise) now parks as a one-line badge and stays stacked on screen until that conversation is read or answered on ANY computer; mark it read on one computer and the badge clears on the others. Search texts now opens the conversation even if notifications are muted (muting is for incoming pop-ups, not something you asked for). The "couldn't open" message is now plain English. The reply box opens automatically again on Mac.

1.1.80 - Search texts: if picking a person doesn't open their conversation, the app now says which step stalled (a message box after 6 seconds). Diagnostic for a Mac-only problem; no other change.

1.1.79 - Text pop-ups now show whether each message you sent was delivered, sent, or failed. On Mac, a conversation opened from Search texts now appears with the Reply button to press (it was not appearing at all); Windows is unchanged.

1.1.78 - Right-click the SyncIQ tray icon and choose Search texts. Type part of a name or a phone number (or a full new mobile), pick the person, and the conversation opens in the corner pop-up with the reply box already open. Replies go from the clinic's normal text number. Opening a conversation marks their texts read.

1.1.77 - Fixes the older phones (T42S) bouncing you to the web login the moment you click a menu in Open web page. The window now signs itself in on the phone's own login page, the same way your browser does, instead of being handed a login from SyncIQ that the phone would not keep.

1.1.76 - Open web page now checks the login against a page the phone actually protects, instead of one that opens for anybody. If the login did not really work you are told, rather than getting a window that looks fine until you click a menu.

1.1.75 - Fixes the older phones (T42S) asking for the web login again the moment you click a menu in Open web page. The window now holds on to the login it was given for every page, instead of letting the phone hand it a blank one.

1.1.74 - Fixes Open web page showing a blank window on the older phones (T42S): 1.1.72 sent it to the wrong page. It lands back on the phone's own web page.

1.1.73 - If a phone refuses its saved admin login, Open web page now falls back to SyncIQ's own login for the clinic instead of giving up, and says plainly when a saved password looks too short to be real.

1.1.72 - Click to call now reads your phones straight from Desk phones -> Phones: nothing is typed twice, phones appear on their own, and all you choose is which one this computer dials. Also fixes the older phones (T42S) asking for the web login again on every menu after Open web page.

1.1.71 - Fixes the phonebook not saving on the newer phones (T57W and similar): the phone needs all five phonebook slots sent at once, and only the first was going, so it quietly kept none of them.

1.1.70 - Set this phone up now also puts SyncIQ's phonebook on the newer phones (T57W and similar), with the update interval and name lookup, and says plainly when the phone won't confirm what it kept.

1.1.69 - When a newer phone (T57W) refuses a login, the message now includes what the phone actually said, so a wrong password can be told apart from the phone refusing for another reason.

1.1.68 - Set this phone up now tries the phone's admin login first and, if the phone refuses it, SyncIQ's own login (one extra try at most, and the refused admin login is skipped next time).

1.1.67
- The SyncIQ login step now says the phone only restarts if its login was different, so a phone that already had it doesn't look like it failed.

1.1.66
- Set this phone up can now also load SyncIQ's own login onto an older-style phone (like the T42S). It asks first, because the phone restarts. It is sent last as its own file. Newer phones (T57W) can't take it this way yet.

1.1.65
- Edit phone has one Save button. It saves the phone's details and, if you typed a password or changed the address, the logins too.

1.1.64
- The pencil box now shows whether a login is saved and whether it has worked: orange = saved, not used yet; green = the phone accepted it; red = the phone refused it. Same for SyncIQ's own login. A saved admin password shows as dots.

1.1.62
- Click to call now says which login a phone is using (admin or SyncIQ's own) and that no admin login or password is needed when SyncIQ's login is there. Adding a phone no longer makes a second copy when it is already in the list.

1.1.61
- Staff computers pick up a phone's saved admin or SyncIQ login automatically, so receptionists never type or see a login.

1.1.60
- Click to call no longer needs the phone's address or login typed in. It uses the address the phone reports, and the phone's admin login if one is saved, otherwise SyncIQ's own login from the phone setup.

1.1.59
- Click to call now always goes straight to the desk phone. The phone-system (API) option is removed, even on computers that were using it: pick your phone once on the Click to call screen and it works. Choosing a phone saves it straight away.

1.1.58
- The app no longer asks at start-up to be the default for phone links. Click to call has a short note about it instead.

1.1.57
- On the web version, a phone's address and admin login can be saved from the page (straight into the SyncIQ app on that computer, never the database), and "Set this phone up" then uses it.
- The web version can now use the admin login saved on this computer for a phone, so it can set phones up without any password in the browser.
- When a phone is set up with SyncIQ's own login and the caller-ID addresses could not be changed, the message now says to save the admin login.

1.1.56
- Fixed "Set this phone up for me" on newer Yealink phones (T57W): the Action URL page is now read the way the phone's own page reads it, so the caller-ID web addresses can be checked and set.

1.1.55
- "Open web page (signed in)" now says which login it used (admin or SyncIQ). The SyncIQ login password has a Copy button.

1.1.54
- The SyncIQ web page, open in an ordinary browser on a computer that is also running this app, can now set up a desk phone and open its web page already signed in. The app does the work through a small local link (this computer only, SyncIQ addresses only). Without the app running, the web page can only open the phone's own login page. Still needs the computer to be on the phone's local network.

1.1.53
- Set up and open any desk phone from any computer on the clinic's network. If this computer has no saved login for a phone, SyncIQ now uses the address the phone reported and SyncIQ's own login, so you no longer have to save each phone on each computer. The computer still has to be on the same local network as the phone (remote into one at the clinic if you are away).

1.1.52
- Fixed: on phones with the browser sign-in popup, SyncIQ now sends the phone's session cookie when it looks for the import key (the login page only shows it to a request with a cookie).

1.1.51
- "Set this phone up for me" on a phone with the browser sign-in popup now finds the phone's import key on a signed-in page (its login page only redirects). If it still cannot, the message lists what each page answered.

1.1.50
- Fixed: "Set this phone up for me" on a phone with the browser sign-in popup failed with "couldn't reach that handset" (an internal slip in 1.1.49). A failed push now also shows the underlying error.

1.1.49
- Fixed: signing in to the older phones. After an earlier SyncIQ push, a phone's web page became a browser sign-in popup, and SyncIQ's login request was refused and counted toward the phone's lockout. SyncIQ now asks once WITH the saved login, works with either kind of sign-in, and stops at once if the phone refuses it. SyncIQ also no longer switches that popup mode on.

1.1.48
- The older phones' login page is now requested the way a browser does it (visit the login page first, then ask for the form with the usual headers). The phone was answering SyncIQ's bare request with a 401 and counting it toward its lockout.

1.1.47
- Diagnostic: a failed phone sign-in now reports what the phone answered on BOTH http and https, including the first words of its login-page reply.

1.1.46
- Diagnostic: when a phone's web sign-in fails, the message now says exactly what the phone answered (which login, password length, each step's status), never the password.
- The pause after a failed sign-in is now 10 minutes and only starts after 3 refused logins in a row (or at once if the phone says it is locked). A success clears the count.

1.1.45
- After any refused or locked sign-in to a phone, SyncIQ now leaves that phone completely alone for 30 minutes (every button), because a Yealink locks for longer each time (12 minutes, then 24) and keeps counting wrong attempts through the lock.

1.1.44
- Each press of "Set this phone up" or "Open web page" now makes ONE sign-in attempt (the admin login if one is saved, otherwise SyncIQ's own), never both. A Yealink keeps counting wrong passwords even after its 12-minute lock ends, so a single wrong attempt locked it again straight away. A refused login now says which login was refused.
- Phone addresses reported by the phone are now kept up to date by the whole app, not only while the Click to call screen is open.

1.1.43
- Fix: 1.1.42 called a phone "locked" when it had only answered a plain 403 (for example a phone that wants https). It now says locked only when the phone itself says so, and looks on https before deciding.

1.1.42
- A phone that has locked its web login (after too many wrong passwords) is now recognised and reported plainly: "wait about 12 minutes". Before, it read as an unreadable login page.
- Signing in now makes ONE attempt per login (admin first, then SyncIQ's own) and stops straight away if the phone says it is locked, so pressing the buttons can no longer lock a phone out.
- The phone's model and firmware now show (read-only) in the Edit phone box, once the phone has reported them through its Action URL.

1.1.41
- The phone's address and logins now live in the pencil's "Edit phone" box, next to the MAC address: the admin login (typed in) and SyncIQ's own login (filled in by itself from the config file, not editable). "Open web page (signed in)" and "Set this phone up" try SyncIQ's login first, then the admin one.
- "Open web page (signed in)" now tries plain http first, the same way "Set this phone up" does. The older phone's https page was being read as an unreadable login.

1.1.40
- "Open web page (signed in)" now signs in from the app itself and opens the phone's page in a SyncIQ window that already holds the session, on both older and newer Yealink phones. It no longer depends on the phone's quick-login setting (the T42S ignores it).

1.1.39
- Phone setup is compressed again: each phone shows its buttons and a one-line address, and the address, login, password, quick-login tick box and link are behind Edit.

1.1.38
- Phone setup is now its own box on each phone (address, login, password, saved on this computer only). New "Open web page (signed in)" button opens the phone's web page already logged in, using the right link for the phone (the password never leaves the app), and "Show the link" displays it with the password hidden. "Set this phone up for me" now also switches on the phone's quick login (wui.quick_login = 1), with a tick box to leave it off.

1.1.37
- Set this phone up: the phone's own save (which really overwrites) now always runs, so the update interval and call lookup are set even when the phonebook slots happened to be blank. The result also checks the interval.

1.1.36
- Set this phone up: also switches on the Remote Phone Book "Incoming/Outgoing Call Lookup" (so names show on calls) in the same save.

1.1.35
- Set this phone up: also sets the Remote Phone Book update interval (the phone's "Update Time Interval") to 4 hours, the same way the phone's own Confirm button does.

1.1.34
- Set this phone up: now fills as many Remote Phone Book slots as the clinic has phonebooks (it always filled just slot 1), named "SyncIQ Book 1, 2..." exactly like the config file. The check afterwards understands several books.

1.1.33
- Set this phone up: the Remote Phone Book check now recognises SyncIQ's book even when the phone shows the address more than once (it wrongly reported a mismatch when the phone was actually correct).

1.1.32
- Older Yealink phones (T42 etc): Set this phone up now saves the Remote Phone Book the same way the phone's own Confirm button does, so all five slots are replaced (an imported file only fills blank ones), then reads the page back to confirm.

1.1.31
- Set this phone up: reads the phone's Remote Phone Book before signing out (it was being read after, so it saw nothing), and understands the phone's "import finished" answer.

1.1.30
- Set this phone up: when the phone does not confirm the phonebook, the message now shows what the phone's Remote Phone Book page and import job actually answered, so we can see why.

1.1.29
- "Set this phone up for me" now overwrites by default: SyncIQ's caller-ID web addresses and all 5 remote phonebook slots replace whatever the phone has (SIP accounts and line keys are never touched). The separate "Overwrite settings" button is gone.

1.1.28
- Older Yealink phones: "Overwrite settings" now asks the phone to let the file replace settings that were already filled in by hand (a Yealink normally only fills blank ones).

1.1.27
- Older Yealink phones: "Overwrite settings" now reads the phone's Remote Phone Book page back and tells you whether slot 1 holds SyncIQ's book and the old SyncIQ books are gone.

1.1.26
- Older Yealink phones (T42 etc): new "Overwrite settings" button on Desk phones > Phones. It replaces the phone's caller-ID web addresses and all 5 remote phonebook slots with SyncIQ's, even if the phone already points somewhere else (it asks first; SIP accounts and line keys are never touched).
- "Set this phone up for me" no longer says the web addresses are set when only some of them were there already: it now checks every one is present.
- The setup button now lives only on Desk phones > Phones (removed from Click to call). Each phone has an "Address & login" box there for its IP address, username and password.

1.1.25
- Older Yealink phones (T42 etc): "Set this phone up for me" now waits for the phone to finish importing the settings (the same wait the phone's own page does) before checking they took, so it should stop saying "the phone ignored it" when it had not finished yet.

1.1.24
- Older Yealink phones (T42 etc): "Set this phone up for me" now uploads the settings file exactly the way the phone's own Import button does (copied from a real capture), which is what the phone was missing.

1.1.23
- Older Yealink phones: when the phone takes the settings file and ignores it, the message now shows what the phone answered to each try (no passwords), so we can see why.

1.1.22
- Older Yealink phones (T42 etc): "Set this phone up for me" now finds the phone's security token, which that model keeps inside a script on its page.

1.1.21
- Older Yealink phones (T42 etc): setting a phone up now looks for the phone's security token in more places, and if it still can't find it the message shows what the phone sent back (no passwords) so we can fix it in one go.

1.1.20
- "Set this phone up for me" now sets the caller-ID web addresses (with the part that lets each phone report its own network address) on the older handsets too (T42S and similar), not just the newer ones. They go in the same settings file as click to call, and SyncIQ reads the phone's page afterwards to check they landed. If the phone already points its caller-ID addresses at something other than SyncIQ, or the page can't be read, they are left alone and it says so. Phonebooks are still not pushed.

1.1.19
- "Set this phone up for me" now also sets the caller-ID web addresses on a newer handset (the six Action URLs: incoming, answered, ended, missed, caller hung up, outgoing), including the part that lets each phone tell SyncIQ its own network address so click to call keeps following it. It reads them back afterwards to check. A web address someone else put there is left alone and reported, and nothing else on the phone is touched.
- The same button is now on each handset under Desk phones -> Phones (it uses the phone's address saved on this computer under Click to call).
- Windows: when SyncIQ isn't the app that opens phone numbers on this computer, it asks once at start-up and can take you straight to Windows' Default apps page (Open settings / Not now / Don't ask again).

1.1.18
- Windows: SyncIQ now registers itself with Windows as an app that can handle phone-number links, so it appears in Settings -> Apps -> Default apps (choose defaults by link type -> TEL). Before this it never showed up there, so clicking a phone number in a browser or PracSuite did nothing. After updating, choose SyncIQ for TEL once; Windows does not let an app pick itself.

1.1.17
- "Set this phone up for me" on a newer handset now asks the phone for its security token the same way the phone's own settings page does, straight after signing in. This is what the last two versions were missing: the phone accepted the sign-in but turned the change down as "not allowed" because SyncIQ never had a token to send with it. If it still can't save, the message now says whether the phone gave a token at all.
- Removed the guess from 1.1.16 that the token would be on the phone's web page. The phone's own code says otherwise.

1.1.16
- "Set this phone up for me" on a newer handset now opens the phone's settings page the way a person would before saving to it, and picks up the security token the phone hands its own web page. On the last version the sign-in worked and the phone then turned the change down as "not allowed"; these are the two things its own page does that SyncIQ wasn't doing.
- Also removed a request detail SyncIQ was adding that the phone's own page never sends, and stopped it sending the same session cookie twice.

1.1.15
- "Set this phone up for me" now shows what the phone actually said when it won't accept the change, instead of only a reason code. On a newer handset it also sends the same request details the phone's own settings page sends, which is the likeliest reason a sign-in could work while the change itself was turned down.
- Fixed: a phone that didn't accept a settings change was reported as "the handset refused the call — check its Action URI allow list", which is the message for a failed test call and sent you off to set by hand the exact thing the button was trying to set. It now says the sign-in worked and the change was refused. A phone that turns the change down because it didn't think SyncIQ was signed in now says so too.

1.1.14
- "Set this phone up for me" now works on newer Yealink handsets. Phones like the T57W run a different web interface from the older ones, so SyncIQ couldn't sign in at all and reported that the login page wasn't what it expected. It now recognises which kind of phone it's talking to and uses the right method for each. On the newer phones it writes the setting directly instead of uploading a settings file, which is more reliable, and it reads the setting back afterwards to confirm it really changed rather than trusting the phone's reply.
- Clearer messages when a push can't finish on a newer phone: whether the phone locked its web login after too many wrong passwords, or whether the setting saved but the phone is still refusing — which are different problems and were both reported the same way before.

1.1.13
- Fixed: click to call and "Set this phone up for me" said "couldn't reach that handset" on a phone whose web page uses https. SyncIQ only ever tried plain http, and a phone with http switched off refuses the connection rather than redirecting, so it looked like the phone was off or on another network. It now tries https when that happens, and accepts the phone's own certificate.
- Click to call now follows a phone around the network. Each handset tells SyncIQ its own address every time it rings, so if the practice router moves a phone, its button updates itself and you get a note saying so. Phones added from the registered-phones picker do this; one you typed an address into by hand stays as typed.

1.1.12
- Fixed: "Set this phone up for me" signed in, sent the settings file and the phone ignored it. Yealink phones require a security token from their own settings page on any change, and silently discard anything without one — there is no error, which is why four attempts looked fine and did nothing. SyncIQ now reads that token off the phone before sending, and sends the file under the name the phone's own import form uses.
- "Click to call" setup now warns that each phone needs to keep the same network address, since SyncIQ dials the handset directly and a changed address stops its button working.

1.1.11
- Fixed: "Set this phone up for me" reported "that phone has no web login page" even though it had signed in perfectly well. The check it ran afterwards was looking at the wrong page; it now simply asks the phone whether it will take a command from this computer, which is the thing being switched on.

